Statox 502 Control Module

Caution! The Statox 502 Control Module has been replaced by the even better Control Module Statox 503.

Technical Data
Product name Statox 502 Control Module
Power supply 24  +/- 2 VDC max. 200 mA
Power consumption max. 5 W
Operating temperature – 10°C to + 60°C
Storage temperature – 20 °C to + 60°C
Pressure – 900 to 1100 hPa
Humidity 0 – 99 % r. h. non condensing
Display 2 lines, 16 segments
Housing Polyamide, IP 20
Connections 24 screw terminals, max. 2,5 mm2 diameter in 6 pluggable terminal blocks
Relays 2 * Alarm, 1 * system failure
Relay specs 250 VAC, 8 A min. load >/= 12 V, 10 mA,  contacts silver / nickel
Dimensions H: 103 mm, W: 45 mm D: 115 mm
System failure relay normally open, active (NO)
max. Load 700 Ohm
Installation 35 mm DIN Rail
CE Marking EN 61326-1:2013