Toxic Gas Detector Statox 505: SIL 2 compliant
You always know what is going on in your plant: Gas detection system Statox 505 compliant to SIL 2 Standard
Intelligent Gas Sensors for AsH3, Cl2, ClO2, CO, COCl2, H2, H2S, HCl, HCN, HF, N2H4, NH3, NO2, O2, O3, PH3 and SO2
The Statox 505 new 4 – 20 mA Transmitter for toxic gases and oxygen features everything that a new gas detection instrument of the latest generation needs: State of the Art components (hardware and software), smart sensor technology, “heartbeat” sensor control and complete system diagnostics on board.
What makes the Statox 505 so reliable?
In process monitoring, the status of plant components in case of a failure is becoming more and more a critical issue. The standards DIN EN 61508 as well as the product standard DIN EN 50402 are powerful tools to calculate the probability of a failure on demand. The Statox 505 complies with all of the requirements of these standards. It obtained the safety integrity level SIL 2. This provides a reliable database for the user to calculate the safety standard of his plant. If the Statox 505 is operated as a SIL 2 component, a so called “proof test” in certain time intervals is mandatory.
All important parameters such as sensor „heartbeat“, signal output, calibration, zero, sensitivity, temperature, sensor memory, amplifier, CPU, power supply etc. are continuously monitored for proper function. In case of a failure, an alarm will be triggered. Thus the system cannot fail without the error being noticed. A green LED signalizes the system status. The display and the controls are located at the inside of the housing – well protected from the elements.
Minimum time and work in the field
The sensors of the Statox 505 are plug and play technology. Each sensor has a F-RAM on board which communicates all relevant parameters to the sensor head: Gas, measuring range, last calibration, ex works calibration, response time etc.
The sensors can easily be calibrated in the shop. For the user this means that he never ever will have to do calibration work in the harsh elements (wind, rain, cold, heat). No more lugging heavy test equipment and gas cylinders into the field. All the user has to do in the field, is plug the sensor back in. To do that, you don`t even need a tool! While the sensor is getting calibrated in the shop, the sensor cartridge stays in place and protects the sensor head from dust and rain.
Trouble- free wall – or pipe mounting
The Statox 505 comes with a mounting plate for either wall – or pipe mounting. No need to open the sensor head for plant installation
|Sensors||Measuring range||Operating temperature||Humidity||Storage temperature|
|Ammonia NH3||0-150 ppm||-20 – +50°C||15-95%||-30 – +60°C|
|Hydrogen cyanide HCN||0-20/100 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Chlorine Cl2||0-5 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Carbon monoxide CO||0-300 ppm||-20 – +50°C||20-90%||-30 – +60°C|
|Hydrogen fluoride HF||0 – 10 ppm||-20 – +50°C||20-90%||-30 – +60°C|
|Oxygen O2||0-35 %||-20 – +50°C||20-95%||-30 – +60°C|
|Sulphur dioxide H2S||0-20/100 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Ozone||0 – 1 ppm||– 20 – + 50°C||20 – 90%||-30 – +60°C|
|Nitrogen NO2||0-5 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Hydrogen H2||0-300 ppm||-20 – +50°C||20-90%||-30 – +60°C|
|Hydrogen chloride HCl||0-50 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Arsine AsH3||0-500 ppb||-20 – +50°C||20-80%||-30 – +60°C|
|Phosphine PH3||0-1 ppm||-20 – +50°C||20-80%||-30 – +60°C|
|Hydrazine N2H4||0-1 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Phosgene COCl2||0-0,5/1,0/100 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Chlorine dioxide ClO2||0-1 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Sulphur dioxide SO2||0-5 ppm||-20 – +50°C||20-95%||-30 – +60°C|
|Sensor head||Statox 505 Type 5375…|
|Display||8 – digits, 14 segments|
|Output||– 4-20 mA, max. load 700 Ohm, service mode: 0 or 2 mA, System fail 0 or 2 mA, overrange 22 mA|
|Protection class||IP 65|
|Approval||II 2 G EEx ib IIC T4|
|Dimensions (HxBxT) without mounting plate||200 x 120 x 90 mm|
|Pressure||900 – 1100 hPa|
|Operation- and storage temperature||– 30 °C to + 60°C|
|Power supply||12 – 28 V DC max. 22 mA|
|Housing||Chromium plated ABS, stainless steel, mounting plate stainless steel|
|Operation voltage Ui||max. 28 V DC|
|Operation current||max. 93 mA|
|Internal capacity Ci||neglectible|
|Internal inductivity Li||neglectible|
|Functional safety||SIL 2 according to EN 50402|
From outside a green LED signalizes the sensor head is operating properly
Inserting the sensor module converts the gas -neutral sensor head into a gas specific gas detector. The stainless steel cartidge can stay in place, even if the sensor is not yet built in and thus protects the interior sensor head from dust and rain.